2" Submersible Pump,Wastewater/Sewage Sulzer Model EJ05W-2 *NEW IN BOX*

Description

*NEW IN BOX* Sulzer EJ 05W-2 Submersible Wastewater Pump
type  ABS scavenger EJ
100% Genuine
Best Pricing
Fast Shipping
Submersible wastewater pump type ABS Scavenger EJ
1/2HP, 115v, 1Phase, 60Hz. Vortex Impeller, 2“ Inch NPT Vertical Discharge, w/ 20’ft. of Cable
Three-phase centrifugal pump
Protection type IP 68
Double carbon/ceramic mechanical seal
Thermal sensors in the motor switch the pump off in the event of overheating (option on BX and BVX models)
Double mechanical seal in the oil chamber
Ball bearings lubricated by insulating nontoxic oil
Water leakage electrode sensors in the oil chamber (as an option on BX and BVX models)
Free solids passage: 45 to 65 mm
Rugged cast iron construction (EN-GJL-250: GG25)
Stainless steel fasteners and motor shaft (AISI 420)
Power cord inlet sealed with rubber and epoxy resin
Standard 7 meter PVC cable
Clog-free flow in sewage and raw water
Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas.
Free solids passage up to 65 mm.
The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof.
Hydraulics with Contrablock system or vortex impellers for clog-free operations
Unique triple seal design for outstanding reliability
Suitable for portable as well as in stationary installations
Easy to lift by using the handle (weight-balance position)
Motor and shaft seal monitoring system as an option
Low noise operation
Reduced maintenance cost
Capacities
Up to 109 m³/h / 480 US gpm
Heads
30 m / 98 ft
Temperatures
40°C / max. 60°C for five minutes
Discharge sizes
3” ANSI 125 / DN 75 NBR 7675 horizontal flange
Maximum speed of rotation
3,450 rpm
Rated power
0.75 – 5.5 kW / 1.0 – 7.5 cv (only 60Hz motors available)
See our other items
Payment
Shipping
​​​​​​​
We accept payment by any of the following methods:
PayPal
​​​​​​​All Major Credit Cards
Checks
Wire Transfers
We ship your order FAST!
Upon receipt, your order will be shipped within 24 hours (Monday-Friday).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it. *Note: you will be responsible to pay for return shipping
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
100% Genuine
Best Pricing
Fast Shipping
— Submersible wastewater pump type ABS Scavenger EJ ================================================= —1/2HP, 115v, 1Phase, 60Hz. Vortex Impeller, 2“ Inch NPT Vertical Discharge, w/ 20’ft. of Cable —Three-phase centrifugal pump —Protection type IP 68 —Double carbon/ceramic mechanical seal —Thermal sensors in the motor switch the pump off in the event of overheating (option on BX and BVX models) —Double mechanical seal in the oil chamber —Ball bearings lubricated by insulating nontoxic oil —Water leakage electrode sensors in the oil chamber (as an option on BX and BVX models) —Free solids passage: 45 to 65 mm —Rugged cast iron construction (EN-GJL-250: GG25) —Stainless steel fasteners and motor shaft (AISI 420) —Power cord inlet sealed with rubber and epoxy resin —Standard 7 meter PVC cable —Clog-free flow in sewage and raw water —Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas. —Free solids passage up to 65 mm. —The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof. —Hydraulics with Contrablock system or vortex impellers for clog-free operations —Unique triple seal design for outstanding reliability —Suitable for portable as well as in stationary installations —Easy to lift by using the handle (weight-balance position) —Motor and shaft seal monitoring system as an option —Low noise operation —Reduced maintenance cost — Capacities Up to 109 m³/h / 480 US gpm Heads 30 m / 98 ft Temperatures 40°C / max. 60°C for five minutes Discharge sizes 3” ANSI 125 / DN 75 NBR 7675 horizontal flange Maximum speed of rotation 3,450 rpm Rated power 0.75 – 5.5 kW / 1.0 – 7.5 cv (only 60Hz motors available)
*NEW IN BOX* Sulzer EJ 05W-2 Submersible Wastewater Pump
type  ABS scavenger EJ
Submersible wastewater pump type ABS Scavenger EJ
1/2HP, 115v, 1Phase, 60Hz. Vortex Impeller, 2“ Inch NPT Vertical Discharge, w/ 20’ft. of Cable
Three-phase centrifugal pump
Protection type IP 68
Double carbon/ceramic mechanical seal
Thermal sensors in the motor switch the pump off in the event of overheating (option on BX and BVX models)
Double mechanical seal in the oil chamber
Ball bearings lubricated by insulating nontoxic oil
Water leakage electrode sensors in the oil chamber (as an option on BX and BVX models)
Free solids passage: 45 to 65 mm
Rugged cast iron construction (EN-GJL-250: GG25)
Stainless steel fasteners and motor shaft (AISI 420)
Power cord inlet sealed with rubber and epoxy resin
Standard 7 meter PVC cable
Clog-free flow in sewage and raw water
Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas.
Free solids passage up to 65 mm.
The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof.
Hydraulics with Contrablock system or vortex impellers for clog-free operations
Unique triple seal design for outstanding reliability
Suitable for portable as well as in stationary installations
Easy to lift by using the handle (weight-balance position)
Motor and shaft seal monitoring system as an option
Low noise operation
Reduced maintenance cost
Capacities
Up to 109 m³/h / 480 US gpm
Heads
30 m / 98 ft
Temperatures
40°C / max. 60°C for five minutes
Discharge sizes
3” ANSI 125 / DN 75 NBR 7675 horizontal flange
Maximum speed of rotation
3,450 rpm
Rated power
0.75 – 5.5 kW / 1.0 – 7.5 cv (only 60Hz motors available)
Fast Shipping
Best Pricing
100% Genuine
See our other items
Payment
​​​​​​​
We accept payment by any of the following methods:
PayPal
​​​​​​​All Major Credit Cards
Checks
Wire Transfers
Shipping
We ship your order FAST!
Upon receipt, your order will be shipped within 24 hours (Monday-Friday).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it. *Note: you will be responsible to pay for return shipping
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Submersible wastewater pump type ABS Scavenger EJ
1/2HP, 115v, 1Phase, 60Hz. Vortex Impeller, 2“ Inch NPT Vertical Discharge, w/ 20’ft. of Cable
Three-phase centrifugal pump
Protection type IP 68
Double carbon/ceramic mechanical seal
Thermal sensors in the motor switch the pump off in the event of overheating (option on BX and BVX models)
Double mechanical seal in the oil chamber
Ball bearings lubricated by insulating nontoxic oil
Water leakage electrode sensors in the oil chamber (as an option on BX and BVX models)
Free solids passage: 45 to 65 mm
Rugged cast iron construction (EN-GJL-250: GG25)
Stainless steel fasteners and motor shaft (AISI 420)
Power cord inlet sealed with rubber and epoxy resin
Standard 7 meter PVC cable
Clog-free flow in sewage and raw water
Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas.
Free solids passage up to 65 mm.
The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof.
Hydraulics with Contrablock system or vortex impellers for clog-free operations
Unique triple seal design for outstanding reliability
Suitable for portable as well as in stationary installations
Easy to lift by using the handle (weight-balance position)
Motor and shaft seal monitoring system as an option
Low noise operation
Reduced maintenance cost
Capacities
Up to 109 m³/h / 480 US gpm
Heads
30 m / 98 ft
Temperatures
40°C / max. 60°C for five minutes
Discharge sizes
3” ANSI 125 / DN 75 NBR 7675 horizontal flange
Maximum speed of rotation
3,450 rpm
Rated power
0.75 – 5.5 kW / 1.0 – 7.5 cv (only 60Hz motors available)